|
Posted by scribbler on July 26, 2009 at 16:02:22:
|
|
In Reply to: Old wall safe posted by |
|
Taking it to a "safe professional" would probably be the least expensive. If the safe were installed properly, it most likely has screws through the body of the safe into the studs or framing around it. The screws will have been inserted from the inside of the safe. You may have to do a little cutting of the framing but it can be done without a lot of headache. MAKE SURE you deal with a PROFESSIONAL who does safe service. There are some good technicians not far from you. |