Follow Ups | Start New Thread | Public Forum | All Forums

Re: basic tools

Posted by George on January 31, 2009 at 12:21:32:

In Reply to: basic tools
posted by
steve winthrop harbor on January 26, 2009 at 20:56:26:

You need a couple of sets of tweezers, one fine point and one long one for pins.
The long tweezers will allow you to check all top pins and springs, a special "master pin removal tool" is a waste of money. IMHO
Whe rekeying any cylinder I always check all top pins for master pins, dirt, proper length drivers and good springs.

Follow Ups:

Post a Followup
Name - etc: