Follow Ups | Start New Thread | Public Forum | All Forums

Re: Hall's Safe - patent April 3rd 1906

Posted by Ken Dunckel Safecracker Boxman on January 19, 2009 at 09:22:54:

In Reply to: Re: Hall's Safe - patent April 3rd 1906
posted by
Aaron, Victoria on January 18, 2009 at 11:32:37:

Aaron try pressuring the bolt control handle first in one direction then the other while turning the dial to see if the ratcheting feel goes away.

Don't have a weight to tell you but it wouldn't hurt to get it weighed before taking it into your building. Might also be helpful to find out about the floor loading capacity where you live as well as elevator capabilities.

A steel plate underneath to distribute weight evenly is almost never a bad idea.
Ken Dunckel

Follow Ups:

Post a Followup
Name - etc: