Follow Ups | Start New Thread | Public Forum | All Forums

More on drilling a safe etc.

Posted by Ray Hearn, Hearn Safe in St Louis, on May 31, 2008 at 16:52:18:

In Reply to: Re: Safe-Cabinet Company... lost combo
posted by
Ken Dunckel Safecracker Boxman on May 27, 2008 at 04:47:24:

Check the above article for a little more info on the subject of safe drilling. The page features a double size picture of a safe door that had 2 1/4" holes drilled in it and repaired. The holes were repaired by replacing the metal where the holes were and the area was spot finished. The spot is entirely within the picture.

BTW You mentioned Asbestos, the Safe Cabinet units DO contain asbestos.

Ray Hearn

Follow Ups:

Post a Followup
Name - etc: