Lcsm0286 Ronald Betschman, CML, CAI, CFDI - Monroeville, OH - USA
June 08, 2019 at 06:34:58
In Reply to Re: WTB Bianchi # 104 key machine|
Posted by Jay Long, CCL - Port Townsend, WA - USA - CSN
June 07, 2019 at 16:13:20
To expand on your thought a little:|
a key machine that has the jaw vise travel in a perpendicular path into the cutter will have a "flat bottom" as opposed to a machine that the carriage pivots into the cutter and will give a canted cut that changes above center or below center of the cutter blade.