Lcsm1562 Arnold Sintnicolaas - Toronto, ON - Canada
June 07, 2019 at 10:35:25
In Reply to Re: Spin-Out Mortise Cylinder Remover|
Posted by Tom Appel, CPL - Berkeley, CA - USA - Sponsor: A.C. Lock Service, Inc.
June 07, 2019 at 08:15:04
|Tom I'm only in the locksmith person. Sofar I have never broke an key that way. When it seams to be to tight. I loosen the top bolt in the lock in it self.The lock drilled in the frame is not 100% if so the mortise cylinder is rubbing the Alum Frame. Arnold|