LCcsm0002 John Soderland, CML, CMST, CJIL - Milwaukee, WI - USA
March 23, 2019 at 14:14:40
In Reply to WTB or source: Precision Hardware dogging mechanism.|
Posted by Douglas Schneider, CPL - San Jose, CA - USA - Sponsor: JYD - Last Chance Hardware
March 23, 2019 at 11:46:46
I take a flat head hex drive screw, cut the head off and weld behind the rounded part. They NEVER strip them out again.|
But if you really need a replacement, I think I have a couple I removed from devices the client didn't want locked down.