Follow Ups | Start New Thread | Public Forum | All Forums

Re: Opening our York Safe

Posted by Bob on March 07, 2010 at 07:12:28:

In Reply to: Re: Opening our York Safe
posted by
Kathy, Nebraska on March 06, 2010 at 18:28:12:

Now that you have figured out the rotations do this 6-8 times -WITH THE DOOR OPEN - before you lock it up. Also make sure there is no debris in any of the bolt holes. Then - unlocked - swing the door open and closed a number of times to make sure it's not sagging. Lastly, close and lock it EMPTY and re-open before putting anything of value in it. Should the handle feel tight or sluggish when you turn it do NOT turn it all the way, open it immediately. If any of this concerns you find a reputable safe man in your area. This would be a good place to look for one.





Follow Ups:



Post a Followup
Name - etc: 

    E-Mail: 

   Subject: 

Comments: